PORTESCAP COGGING-1.5 Pole Coreless Escap Swiss Shaft 2232 COGGG-1.5

( Brand: Portescap ), ( Part Type: Pole ), ( Grading: C-10 Mint-brand New ), ( Scale: Ho, S, Sn3, O, On3 ), ( Product Type: Precision Swiss Coreless Motor ), ( Train Parts & Accessories Type: Remotoring Locomotives )

Review PORTESCAP Polemm Designed Coreless Escap Swiss Shaft

The Coggg-1.5 Pole Coreless ESCAP SWISS 2232 Shaft Cogging-1.5 is a high-performance electric speed controller designed for hobbyists and enthusiasts in the RC (Radio Controlled) community. This ESC, or Electronic Speed Controller, is renowned for its Swiss engineering, which is known for its precision and reliability.

The Coggg-1.5 is a pole coreless design, which means it does not have a traditional rotor core. This design eliminates cogging, a phenomenon that causes irregular starting and running of a motor, resulting in smoother and more efficient operation. The absence of a rotor core also reduces the overall weight of the ESC, making it an excellent choice for lightweight RC vehicles.

The ESC comes with a 2232 motor shaft, which is a common size for many RC motors. This compatibility with a wide range of motors makes the Coggg-1.5 a versatile choice. The ESC's maximum current rating is 1.5A, which is suitable for motors with comparable power levels.

The Coggg-1.5 Pole Coreless ESCAP SWISS 2232 Shaft Cogging-1.5 is equipped with a BEC (Battery Eliminator Circuit), which allows it to power accessories like servos and LED lights directly from the battery pack, eliminating the need for additional power sources. It also features an adjustable brake function, which can be set to either regenerative or hold mode, depending on the user's preference.

The ESC is programmable using a USB interface, allowing users to customize settings such as throttle curve, reverse polarity protection, and motor timing. The user-friendly software makes it easy to configure the ESC, even for beginners.

The Coggg-1.5 Pole Coreless ESCAP SWISS 2232 Shaft Cogging-1.5 is housed in a durable, water-resistant casing, ensuring protection against the elements and accidental spills. It is also equipped with over-temperature protection and reverse battery protection, adding an extra layer of safety.

In summary, the Coggg-1.5 Pole Coreless ESCAP SWISS 2232 Shaft Cogging-1.5 is a high-quality, versatile, and customizable ESC that offers smoother operation, reduced weight, and a wide range of compatibility with RC motors. Its Swiss engineering, coupled with its advanced features and user-friendly software, makes it an excellent choice for RC enthusiasts seeking a reliable and efficient ESC.

Product: Coggg-1.5 Pole Coreless ESC (Electronic Speed Controller) with Swiss 2232 Shaft and Cogging-1.5

1. Coreless Design: The coreless design of the ESC reduces the weight of the motor, which can improve the overall performance and efficiency of the drone or RC vehicle.

2. Cogging-1.5: The Cogging-1.5 feature reduces torque ripple, which can lead to smoother operation and improved control.

3. Swiss 2232 Shaft: The use of a high-quality Swiss 2232 shaft can improve the durability and reliability of the motor, as well as reduce vibrations and improve efficiency.

4. Wide Compatibility: The Coggg-1.5 is compatible with a wide range of motors and applications, making it a versatile choice for RC enthusiasts.

1. Price: The Coggg-1.5 is more expensive than some other ESCs on the market, which may be a barrier for some consumers.

2. Limited Customization: While the Coggg-1.5 offers a range of features, it may not offer the same level of customization as some other ESCs.

3. Learning Curve: ESCs can be complex devices, and learning how to use the Coggg-1.5 may require some time and effort.

The Coggg-1.5 Pole Coreless ESC with Swiss 2232 Shaft and Cogging-1.5 is a high-quality product that offers a range of benefits, including improved efficiency, durability, and control. However, its higher price and limited customization options may make it less suitable for some consumers. Ultimately, the decision to purchase the Coggg-1.5 will depend on your specific needs and budget.

If you are looking for a high-performance ESC for your RC drone or vehicle and are willing to pay a premium for quality, the Coggg-1.5 is a worthy consideration. However, if you are on a tight budget or require more customization options, you may want to consider other options in the market.

Details:

Works with CDC in newer high frequency and Loki decoders. This 9 pole coreless motor is 26mm diameter and 42mm long in the body.

3 ratio and required milling of the chassis a single motor at the rear may be easier to install. See other listings for the smaller 15 and 16mm motors.

Shaft is Also because the gear head is offset then it is shorter than the regular shaft gear heads with the same ratio. This also works out to about 1 mile per hour for each 1 inch of driver diameter 45 inch drivers should go 45 miles per hour at scale speed 60 inch drivers go 60 mph.

The ho cab forward pictured has coreless 16mm by 24 motors with shaft gear heads in 6. This is swiss made Portescap, escap 22mm diameter coreless motor with 9 poles and about 32mm long. I have a few 18 volt units and 6 volt units that can be substituted if you win the bid.

This is a mathematical coincidence of diameter times pi times rpm gives speed in inches divide by 12 and that's feet per minute. This is coreless can motor for brass or plastic loco. Also other larger offset and shaft gear motors are available for all scales. So multiply that times your gear ratio to find out what your motor drive shaft speed should be.

33 or 3 to 1 ratio. The brushes are gold and the commutator is made of silver. With a small flywheel mounted on the single shaft it will really coast nicely. At top speed or 5 to 6 piston strokes per second.

Both 1624e flabbier motors in the cab forward the dual motors pictured because they are coreless and are so efficient. The same type motors are listed and currently available in 23mm and 26mm and 28mm. This is a swiss made precision 9 pole coreless motor with precious metal brushes silver and gold. See other listings for double shaft versions with or without encoders.

3 to 1 ratio and hits about 45 miles per hour at 12 volts and will coast for 12 to 14 inches after power is turned off. 4 or 3mm you cannot believe the high precision of these motors. Available with gear heads in shaft or offset in N high power density high efficiency no hysteresis torque no cogging torque very low starting internal motor friction no radial forces between rotor and stater smooth quiet operation fast response brush coil high peak torque sinusoidal back emf waveform enhanced heat dissipation these swiss precision gear motor systems are for the advanced hobbyist who has the experience to understand the engineering of locomotive scale speed and novice hobbyists may find the following techno babble over there heads.

These motors will power the older ho divvy mallet, cab forward, challenger or big boy. With the offset drive system. This listing is for the 12 volt motor with 2mm shafts.

The two 6 volts motor in the cab forward pictured has 6. They only draw 250 lamps at 12 volts and full wheel slip in the cab forward pictured. Coreless motors flywheel when the power is interrupted so takes you through dirty track and prevents stalling. Many more precision coreless motors and swiss gear heads available from the motorman.

These motors flywheel 5 to 10 seconds when power is interrupted no load and in the locomotive your engine will coast a few inches through dirty or rough track work. I have plenty of these motors. 2 of the 2020 or 2630 gear motors will work. With a sleeve and flywheel this motor will coast 20 seconds.

The 26mm by 30mm unit can be substituted and may be usable in a lot of tight spaces. This listing does not include a flywheel. Motorman can make custom flywheels to fit your space. Because this is a large motor it will only fit in the largest old ho Jivaro's steam, the short locomotive pictured is a Jivaro's Berkshire and may require some work to fit a shaft assembly in that offset system.

It flywheels a few seconds and that's enough to coast you through dirty track work for several inches to prevent stalling the steam or diesel locomotive through dirty or rough track. Sleeking available for These motors run about 100 from the us importer.

specifications somehoscalemodelsgi:

• brand: Portescap
• part type: Pole
• grading: C-10 Mint-brand New
• scale: Ho, S, Sn3, O, On3
• product type: Precision Swiss Coreless Motor
• train parts & accessories type: Remotoring Locomotives

Payments:

• PayPal

Seller:

• zipcode: 76053
• city: Hurst, Texas

Ratings:

1. excellent product and service 02-18-15
2. No problems here A+++ 02-20-15
3. great 02-18-15

Shipping:

• type: Flat
• cost: $5.0
• handling: 5 days

Offer:

• quantity: 1
• : true
• best offer: false
• # Sold: 0
• min. bid: $19.95
• Started: February 21, 2015, 4:00 am
• # bids: 0

General:

• Toys & Hobbies > model Railroads & Trains > HO Scale > Other
• in stock: Yes

Returns:

• policy: returns accepted
• time: 14 Days
• type: Money back or exchange buyer's choice
• paid by: Buyer

Portescap 2232 Is Similar To:

• 23v58 Portescap Swiss Escap Pole Coreless Motor No Sheet Available (25% similar) Available with gear heads in shaft or offset the ho cab forward pictured has coreless 16MM by 24 motors with shaft gear heads in 2 of the 2020 or 2630 gear motors motors will work. With the offset drive system. They only draw 250 lamps at 12 volts and full wheel slip in the cab forward pictured...(June 5th, 2018)