COPAL 1628 Gearmotor Ultra Turntables Drawbridges Slow Shays Turnouts

( Brand: Copal ), ( Grading: C-10 Mint Brand New ), ( Type: Iron Core ), ( Scale: All Scale And Robotics ), ( Product Type: Iron Core Motors ), ( Building Type: Mechanical Parts )

Review COPAL Gearmotor Ultra Turntables Drawbridges Slow Shays Turnouts

Copal Gearmotor's Ultra Turntables 1628 Drawbridges and Slow Shays Turnouts are an exceptional addition to any model railroad layout. These high-quality products are meticulously crafted to provide a realistic and authentic experience for hobbyists and train enthusiasts alike.

The Copal 1628 Drawbridges are designed with intricate detail, capturing the essence of a historical drawbridge. Each bridge is equipped with a robust Copal Gearmotor, ensuring smooth and reliable operation. The motor features a slow speed setting, allowing you to control the movement of the bridge at your preferred pace, adding an extra layer of realism to your layout. The drawbridge is also designed to withstand frequent use, ensuring durability and longevity.

The Slow Shays Turnouts are another standout product from Copal Gearmotor. These turnouts are modeled after the classic Slow Shays locomotive, known for their slow and steady movement. The Copal Gearmotor integrated into these turnouts ensures a smooth and controlled operation, allowing for precise tracking and alignment of your trains. The turnouts are also designed to seamlessly blend into your layout, providing a seamless and realistic experience.

Both the Copal 1628 Drawbridges and Slow Shays Turnouts are built with high-quality materials, ensuring they can withstand the rigors of regular use. The attention to detail and craftsmanship are evident in every aspect of these products, from the intricate designs to the smooth operation of the Copal Gearmotors. Whether you're a beginner or an experienced model railroad enthusiast, these products will enhance your layout and provide hours of enjoyment.

1. High-Quality Construction: Copal Gearmotor is known for its durable and robust construction, ensuring a long lifespan for the turntables and turnouts.

2. Smooth Operation: The slow-motion operation of the drawbridges and turnouts provides a realistic experience, enhancing the overall enjoyment of operating your model railway.

3. Wide Compatibility: These products are compatible with most popular model railway systems, making them a versatile option for hobbyists.

4. Easy Installation: Copal Gearmotor products come with clear instructions, making installation straightforward and quick.

5. Reliable Customer Service: Copal Gearmotor offers excellent customer service, providing support and assistance should you encounter any issues.

1. Cost: The high-quality and robust construction of these products come at a premium price, which may be prohibitive for some hobbyists with a limited budget.

2. Limited Customization: While Copal Gearmotor products are compatible with various model railway systems, the level of customization may be limited compared to some other brands.

If you're looking for high-quality, reliable, and easy-to-use turntables, drawbridges, and turnouts for your model railway, Copal Gearmotor Ultra Turntables 1628, Drawbridges, and Slow Shays Turnouts are an excellent option. While they may be more expensive than some alternatives, the smooth operation, robust construction, and reliable customer service make them a worthwhile investment for many hobbyists.

If your budget allows, I would recommend considering Copal Gearmotor Ultra Turntables 1628, Drawbridges, and Slow Shays Turnouts for your model railway. Their high-quality construction, smooth operation, and wide compatibility make them an excellent choice for enhancing your model railway experience. However, if you're working with a limited budget, I would suggest researching other options to find a more affordable solution that still meets your needs.

Details:

At top speed or 5 to 6 piston strokes per second. See other listings for 10mm by 26mm cylindrical and 10 by 12 by 20mm and 24mm motors with and without the gear heads. This is motor will crank about 12,000 rpm at 12 volts .

The 1mm shafts can be sleeved to This is the precious metal version which has gold and silver brushes and commutation. See other listings for the rolls Royce class of motors described as following Swiss made precision rare earth re10 10mm by 24mm careless single 1mm shaft motor without the gear head. The 1024 is available with an integral encoder and ribbon cable.

The re10 1024 is also available in 1024 double 1mm shafts and with a gear head and or an encoder. Many more precision careless motors and Swiss gear heads available from the motorman. Happy trains.

This is a mathematical coincidence of diameter times pi times rpm gives speed in inches divide by 12 and that's feet per minute. 1331 motors and gearmotor and also economy flat can 10 by 12 by 11 or 13 or 15 single and double shafts. 1mm shafts can be sleeved to 5mm 2mm or 2.

Kits are available for all major brass locomotives see my other listings. See spec sheet for back emf factor. See other listing for units with gear heads. Macon uses neodymium in their re series and neodymium rare earth magnets double or triple the torque and this motor is also available in a 1024 size with double shafts size and both 1024 and 1017 are available with gear heads 4 to 1 ratio or 16 to 1 multiples of 4 is 64 then 256 and 1024.

Winners can substitute the 1228 gearmotor pictured. This is a careless rolls Royce quality can motor for brass or plastic loco diesel or steam loco. It is a plus if the magnets are samarium cobalt or neodymium as rare earth magnets are a lot more powerful and expensive than along magnets and double or triple motor torque. The lack of an iron core careless motor means zero clogging and when power is interrupted it coasts and does not stall.

These Swiss precision gearmotor systems are for the advanced hobbyist who has the experience to understand the engineering of locomotive scale speed and novice hobbyists may find the techno babble over there heads. Rpm per volt because of their efficiency these motors will not load down on hill or under heavy loads and your pack will deliver more volts for speed high motors eat up your volts eating up your speed. Efficiency is rated over 75 converting amps to stall torque.

If you like your locomotive to start like the prototype and chug smoothly through rough track and dead spots this is the motor for you. Making it as powerful as a much larger motor and more powerful than the larger 1219 motors because of the neodymium magnets. Works with CDC in newer high frequency decoders. This also works out to about 1 mile per hour for each 1 inch of driver diameter 45 inch drivers should go 45 miles per hour at scale speed 60 inch drivers go 60 mph.

4mm gear head has 2mm shaft and quadruples the torque. This is a listing for one economy iron core 16mm by 20mm iron core Copal motor with 324 to1 ratio gear head overall 33mm long and double rectangular 4mm by 2mm shaft.

Rpm per volt these motormen are known as Goolagong or bell armature in Europe and used in Rico TRX matrix and Marlin and are available in sizes 6mm to 40 and gear heads grebe n scale, ho, hon3, nn3, sn3, on3,scale, o scale, narrow gauge, standard gauge, see below see below see below careless motors flywheel when the power is interrupted so takes you through dirty track and prevents stalling. With just a small flywheel on the 1mm shaft performance is excellent.

It flywheels a few seconds and that's enough to coast you through switch work for several inches to prevent stalling the steam or diesel locomotive through dirty or rough track work with or without flywheel. 4mm shaft extension see other micro locomotion listings for 1319 remix 1320 will accept a 10mm gear head. The brushes are gold and the commutator is made of silver. These motors run about 100 from the us importer.

Factory spec sheets are available at Macon dot com. For motion control engineers the 1024 has an encoder and ribbon cable. So multiply that times your gear ratio to find out what your motor drive shaft speed should be.

volts and amps vary inversely under load. Flywheels are 5 each. See other listings for the 10 by 12 by 15 double shaft mashing. This listing is for the motor equipped with neodymium magnets which have 35 times the power of along and as a result a motor delivers 2 or 3 times the torque of an equal motor with along magnets this motors torque is in the factory spec sheet and micro locomotion has a stall torque comparison chart and torque watches to measure stall torque of motors.

33 or 3 to 1 ratio up and also planetary systems 4 to 1 and up. See spec sheet for back emf factor. 4mm it has neodymium magnets which are 35 times the power of along and in a motor double or triple stall torque with a 4 to 1 planetary gear head these motors then have a 2mm shaft and 4 times the torque and for he robot guys ratios up to 1000 to 1.

Available with gear heads in shaft in You can't do that with a can iron core motor. Due to design which more closely follows the magnetic hysteresis and uses it to develop the most power from the magnetism available.

Flywheels available for 5 custom for your size requirements. Available with spur or planetary gear heads gp10 or the other Macon the gear heads have 2 or 3mm shaft and ratios available from 3,44 or 6 to 1 up all careless can motors will coast when power is interrupted and have zero clogging at low speeds but with a flywheel it will coast several seconds no load and a lot longer with a flywheel check other listings for the gear head model's this is a single shaft. If link does not work go to Macon dot motors are available by special order with extra long double shafts.

5 2 or Also check other listings for the tiny tots and mighty mite 6 and 8mm gearmotor. Some of the flabbier motors pictured have a planetary 4 to 1 gp10 Macon gear head with a 2mm shaft extension and its available 2.

Ideal for robotics such as drawbridges or turnouts or turntable drives.

specifications somehoscalemodelsgi:

• brand: Copal
• grading: C-10 Mint Brand New
• type: Iron Core
• scale: All Scale And Robotics
• product type: Iron Core Motors
• building type: Mechanical Parts

Seller:

• zipcode: 76053
• city: Hurst, Texas

Ratings:

1. Great product great to do business with A+A+A+ 02-07-15
2. works great 02-08-15
3. Great communication. A pleasure to do business with. 02-08-15
4. great motor thanks 02-08-15

Returns:

• paid by: Buyer
• type: Money back or exchange buyer's choice
• time: 14 Days
• policy: returns accepted

Payments:

• PayPal

General:

• Toys & Hobbies > model Railroads & Trains > HO Scale > Other
• in stock: Yes

Offer:

• min. bid: $14.95
• # Sold: 0
• Started: February 9, 2015, 4:08 pm
• quantity: 1
• best offer: false
• # bids: 0

Shipping:

• type: Flat
• handling: 15 days
• cost: $5.0

Copal 1628 Is Similar To:

• La 16g-324sh Copal 1628 Slow (28.9% similar) Due to design which more closely follows the magnetic hysteresis and uses it develop most power from magnetism available. See other listings for 10MM by 26 cylindrical and 12 20 24 motors with without the gear heads. See other listings for the rolls Royce class of motors described as following: ...(November 6th, 2017)